This product, although classified under the brand ACER, may have been manufactured by EMACHINES, GATEWAY after mergers, acquisitions, or a change in name.
Manual abstract: user guide ACER ASPIRE R7-571G
Detailed instructions for use are in the User's Guide.
Â¢ Do not touch the lead contact or the sticky surface of the adhesive tape on the booster. Align the protrusion with â mark Earth sheet Lead contact of the Film aerial A booster (metal part) Lead terminal of the film aerial
Recommended position â¢ Be sure to check the installation position of film aerial A before installing. film aerial cannot be re-pasted. Â¢ Keep a minimum distance of 100 mm from the other aerials. *1 Where the earth sheet can be pasted on the metal part of the front pillar. *2 Do not paste the booster on the ceramic line (black part) around the windscreen because there is not enough adhesion. The following procedures are mainly for installing on the right side: 3 Clean the windscreen with the cleaner D 5 Remove the Sheet II vertically and provided. Paste the film aerial on the windscreen slowly. Cleaner D Sheet II â¢ Wait until the surface of the windscreen is completely dry before proceeding. Â¢ Warm the surface of the windscreen with the defroster if it is cold, such as during winter. 4 Remove the Sheet I horizontally and paste the film aerial on the windscreen. Sheet I
Booster Earth sheet Booster Film aerial A
9 Paste the earth sheet onto the metal part of the front pillar. (â 2) Front pillar
Align the protrusion with 5 mark
6 Rub the film aerial gently onto the
windscreen to allow it to stick firmly. 10 Connect the cable to the DAB aerial input on the rear panel of the 11 Secure the cable to the pillar at several locations using the cable 12 Attach the front pillar cover back to its original position. clampers C. Earth sheet Booster Front pillar cover â¢ Ensure that the front pillar cover does not damage the earth sheet and booster. 13 Check that the DAB aerial power is set to âONâ...